INSTALLATION CAUTION / NOTICE / HINT NOTICE:
PROCEDURE 1. INSTALL FORWARD RECOGNITION CAMERA (a) When using a new forward recognition camera:
(b) Engage the 4 guides as shown in the illustration. NOTICE: Do not touch the camera lens.
(c) Connect the connector to install the forward recognition camera. 2. INSTALL FORWARD RECOGNITION LATCH (a) Engage the 4 guides and 2 claws as shown in the illustration to install the forward recognition latch.
3. INSTALL NO. 1 FORWARD RECOGNITION COVER (a) Engage the 2 clips and 2 guides as shown in the illustration to install the No. 1 forward recognition cover.
4. INSTALL NO. 2 FORWARD RECOGNITION COVER (a) Engage the 2 guides and 2 claws as indicated by the arrows, in the order shown in the illustration to install the No. 2 forward recognition cover.
5. ADJUST FORWARD RECOGNITION CAMERA (a) If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning. Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Start Function, Gasoline Model): Engine Immobiliser System Signal (Some Circuit Quantity, Reported via Serial Data) Invalid (B279986)
DESCRIPTION If there is a communication malfunction between the ECM and certification ECU (smart key ECU assembly), or when the communication ID codes do not match, the ECM stores this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area Note B279986 Engine Immobiliser System Signal (Som ...