Toyota Avalon Service & Repair Manual: Driving Support ECU (C1A01)

DESCRIPTION

If the forward recognition camera detects a malfunction in the internal circuit of the driving support ECU assembly, DTC C1A01 is stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1A01

Driving Support ECU

2 seconds after the power switch is turned on (IG), a malfunction in the driving support ECU assembly internal circuit is detected for 5 seconds or more.

Driving support ECU assembly

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the driving support ECU assembly, always replace it with a new one. If a driving support ECU assembly which was installed to another vehicle is used, the information stored in the driving support ECU assembly will not match the information from the vehicle. As a result, a DTC may be stored.
  • The lane departure alert system (w/ steering control) uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting.

    Click here

PROCEDURE

1.

REPLACE DRIVING SUPPORT ECU ASSEMBLY

(a) Replace the driving support ECU assembly.

Click here

NEXT

END

    Lane Departure Alert System (w/ Steering Control)(for Hv Model)

    Front Radar Sensor (C1A10)

    See More:

    Toyota Avalon Service & Repair Manual > Wiper And Washer System(for Gasoline Model): Operation Check
    OPERATION CHECK CHECK SERVICE POSITION CONTROL (a) Turn the engine switch off. (b) Within approximately 45 seconds of turning the engine switch off, hold the windshield wiper switch assembly in the MIST position for 2 seconds and confirm that the wipers move to the uppermost position. CHECK VEHICLE ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0166