INSTALLATION PROCEDURE 1. INSTALL ACCELERATOR PEDAL
(b) Install the 2 bolts. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} 2. INSTALL ACCELERATOR PEDAL PAD (a) Engage the 4 claws to install the accelerator pedal pad to the accelerator pedal. 3. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY NOTICE:
(a) Connect the rod of the accelerator pedal sensor assembly to the accelerator pedal and install the accelerator pedal sensor assembly with the 3 nuts. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} (b) Connect the accelerator pedal sensor assembly connector. 4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here |
Toyota Avalon Service & Repair Manual > Blower Unit: Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE AIR FILTER COVER PLATE (a) Disengage the claw and 2 guides as shown in the illustration to remove the air filter cover plate. Remove in this Direction (1) Remove in this Direction (2) 2. REMOVE CLEAN AIR FILTER (a) Remove the air filter sub-assembly as shown in the il ...