INSTALLATION PROCEDURE 1. INSTALL BATTERY COOLING BLOWER BRACKET (a) Install the battery cooling blower bracket to the battery cooling blower assembly with the 3 bolts. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} (b) Engage the clamp. 2. INSTALL BATTERY COOLING BLOWER ASSEMBLY (a) Install the battery cooling blower assembly to the HV battery with the bolt and nut. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} NOTICE:
(b) Connect the battery cooling blower assembly connector. 3. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT (a) Install the No. 1 hybrid battery intake duct to the battery cooling blower assembly with the 2 clips. (b) Engage the 2 clamps. 4. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
(b) Fully tighten the 6 bolts in the order shown in the illustration. Torque: 16 N·m {163 kgf·cm, 12 ft·lbf} 5. INSTALL REAR UNDER COVER (a) Engage the 2 guides. (b) Engage the 2 clips to install the rear under cover to the rear seat cushion leg sub-assembly. 6. INSTALL REAR UNDER SIDE COVER LH (a) Engage the claw, 5 clips and guide. (b) Install the rear under side cover LH with the 2 clips. 7. INSTALL REAR DOOR SCUFF PLATE LH Click here 8. INSTALL REAR UNDER SIDE COVER RH (a) Engage the claw, 5 clips and guide. (b) Install the rear under side cover RH with the 2 clips. 9. INSTALL REAR DOOR SCUFF PLATE RH HINT: Use the same procedure as for the LH side. 10. INSTALL REAR SEAT CUSHION LOCK HOOK Click here 11. INSTALL REAR SEAT CUSHION ASSEMBLY Click here 12. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Fuel Lid Opener System(for Gasoline Model): Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected ...