REMOVAL PROCEDURE 1. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY Click here 2. REMOVE REAR SEAT CUSHION ASSEMBLY Click here 3. REMOVE REAR SEAT CUSHION LOCK HOOK Click here 4. REMOVE REAR DOOR SCUFF PLATE LH Click here 5. REMOVE REAR UNDER SIDE COVER LH
(b) Disengage the claw, 3 clips (B), 2 clips (C) and guide to remove the rear under side cover LH. 6. REMOVE REAR DOOR SCUFF PLATE RH HINT: Use the same procedure as for the LH side. 7. REMOVE REAR UNDER SIDE COVER RH
(b) Disengage the claw, 3 clips (B), 2 clips (C) and guide to remove the rear under side cover RH. 8. REMOVE REAR UNDER COVER (a) Pull the rear under cover in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 clips.
(b) Pull the rear under cover in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides to remove it from the rear seat cushion leg sub-assembly. 9. REMOVE REAR SEAT CUSHION LEG SUB-ASSEMBLY
10. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT
11. REMOVE BATTERY COOLING BLOWER ASSEMBLY
12. REMOVE BATTERY COOLING BLOWER BRACKET
(b) Remove the 3 bolts and battery cooling blower bracket from the battery cooling blower assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Blind Spot Monitor System(for Gasoline Model): Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of ...