INSTALLATION PROCEDURE 1. INSTALL BATTERY VOLTAGE SENSOR CAUTION: Be sure to wear insulated gloves and protective goggles.
(b) Connect the battery voltage sensor connector. NOTICE: Make sure that the connector is connected securely. 2. INSTALL NO. 1 HV BATTERY SHIELD PANEL CAUTION: Be sure to wear insulated gloves and protective goggles. (a) Pull back the rear No. 1 HV battery shield and install the No. 1 HV battery shield panel to the HV battery. (b) Install the bolt and nut. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} (c) Connect the battery voltage sensor connector. (d) Engage the clamp. 3. INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY CAUTION: Be sure to wear insulated gloves and protective goggles. (a) Install the upper HV battery cover sub-assembly to the HV battery with the 8 bolts and 4 nuts. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} 4. INSTALL HV BATTERY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Engine Oil Pressure Sensor/Switch "A" Circuit Short to Battery (P052012,P052014)
DESCRIPTION Variable oil pump control uses the oil pressure control valve assembly, engine oil temperature sensor, oil pressure sensor and ECM to optimize the oil pressure and oil volume required by each component to reduce friction by monitoring the engine temperature and engine speed. The oil pres ...