REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during hybrid battery terminal block removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/Replaced
CAUTION:
NOTICE: After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work. Click here PROCEDURE 1. REMOVE HV BATTERY Click here 2. REMOVE UPPER HV BATTERY COVER SUB-ASSEMBLY Click here 3. REMOVE NO. 1 HV BATTERY SHIELD PANEL Click here 4. REMOVE HYBRID BATTERY TERMINAL BLOCK CAUTION: Be sure to wear insulated gloves and protective goggles.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Child Restraint Seat Tether Anchor: Installation
INSTALLATION PROCEDURE 1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET HINT: Use the same procedure for all child restraint seat tether anchor brackets. (a) Engage the guide and install the child restraint seat tether anchor bracket with the bolt. Torque: 21 N·m {214 kgf·cm, 15 ft·lbf} 2. I ...