Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT HV BATTERY JUNCTION BLOCK ASSEMBLY

(a) Inspect SMRB:

(1) Measure the resistance according to the value(s) in the table below.

Component without harness connected

(HV Battery Junction Block Assembly)

Standard Resistance:

Tester Connection	Condition	Specified Condition
y5-1 (+) - S2-1 (CBI)	Auxiliary battery voltage not applied between terminals K18-1 (SMRB) and K18-3 (GND)	10 kΩ or higher
y5-1 (+) - S2-1 (CBI)	Auxiliary battery voltage applied between terminals K18-1 (SMRB) and K18-3 (GND)	Below 1 Ω

(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
K18-1 (SMRB) - K18-3 (GND)	-40 to 80°C (-40 to 176°F)	25.0 to 59.0 Ω

If the result is not as specified, replace the HV battery junction block assembly.

(b) Inspect SMRG:

(1) Measure the resistance according to the value(s) in the table below.

Component without harness connected

(HV Battery Junction Block Assembly)

Standard Resistance:

Tester Connection	Condition	Specified Condition
y3-1 (-) - S3-1 (CEI)	Auxiliary battery voltage not applied between terminals K18-4 (SMRG) and K18-3 (GND)	10 kΩ or higher
y3-1 (-) - S3-1 (CEI)	Auxiliary battery voltage applied between terminals K18-4 (SMRG) and K18-3 (GND)	Below 1 Ω

(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
K18-4 (SMRG) - K18-3 (GND)	-40 to 80°C (-40 to 176°F)	25.0 to 59.0 Ω

If the result is not as specified, replace the HV battery junction block assembly.

(1) Measure the resistance according to the value(s) in the table below.

Component without harness connected

(HV Battery Junction Block Assembly)

Standard Resistance:

Tester Connection	Condition	Specified Condition
y3-1 (-) - S3-1 (CEI)	Auxiliary battery voltage not applied between terminals K18-2 (SMRP) and K18-3 (GND)	10 kΩ or higher
y3-1 (-) - S3-1 (CEI)	Auxiliary battery voltage applied between terminals K18-2 (SMRP) and K18-3 (GND)	24.3 to 29.7 Ω

(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
K18-2 (SMRP) - K18-3 (GND)	-40 to 80°C (-40 to 176°F)	140 to 290 Ω

If the result is not as specified, replace the HV battery junction block assembly.

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lane Departure Alert System (w/ Steering Control)(for Hv Model): Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of ...

Toyota Avalon (XX50) 2019-2022 Owners Manual