DESCRIPTION The hybrid vehicle control ECU estimates the thermal load of the high voltage fuse. If the accumulated thermal load exceeds the threshold, the hybrid vehicle control ECU will store this DTC.
CONFIRMATION DRIVING PATTERN HINT: After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure. Click here
CAUTION / NOTICE / HINT HINT: If the hybrid battery terminal block has been replaced, make sure to perform "High Voltage Fuse Accumulated Load History Reset" and then clear the DTCs. PROCEDURE
Click here
Click here
(a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Enter the following menus: Powertrain / Hybrid Control / Clear DTCs. (d) Clear the DTCs and freeze frame data. Powertrain > Hybrid Control > Clear DTCs(e) Turn the power switch off.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Door Opening Trim Weatherstrip: Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. REMOVE SPARE WHEEL COVER ASSEMBLY (for Gasoline Model) w/ Seat Heater System: Click here 2. REMOVE LUGGAGE COMPARTMENT INNER TRIM PAD (for Gasoline Model ...