Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Terminals Of Ecu

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Engine / Hybrid / Battery Control / Hybrid Control System / Terminals Of Ecu

TERMINALS OF ECU

HYBRID VEHICLE CONTROL ECU

Terminal No. (Symbol)	Wiring Color	Terminal Description	Input/Output	Condition	Specified Condition
A23-1 (+B2) - G46-6 (E1)	W - W-B	Power source	Input	Power switch on (IG)	11 to 14 V
A23-3 (IG2) - G46-6 (E1)	B - W-B	Power source	Input	Power switch on (IG)	11 to 14 V
A23-8 (VCP2) - A23-18 (EPA2)	SB - P	Accelerator pedal sensor assembly power source (for VPA2)	Output	Power switch on (IG)	4.5 to 5.5 V
A23-9 (VCPA) - A23-20 (EPA)	BE - L	Accelerator pedal sensor assembly power source (for VPA)	Output	Power switch on (IG)	4.5 to 5.5 V
A23-13 (IWP) - G46-6 (E1)	L - W-B	Inverter water pump with motor assembly signal	Output	Power switch on (READY)	Pulse generation (Waveform 1)
A23-14 (NIWP) - G46-6 (E1)	W - W-B	Inverter water pump with motor assembly signal	Input	Power switch on (READY)	Pulse generation (Waveform 1)
A23-15 (STP) - G46-6 (E1)	LA-G - W-B	Stop light switch	Input	Brake pedal depressed	11 to 14 V
A23-15 (STP) - G46-6 (E1)	LA-G - W-B	Stop light switch	Input	Brake pedal released	0 to 1.5 V
A23-17 (LIN3) - G46-6 (E1)	L - W-B	LIN communication signal (A/C inverter, auxiliary battery state sensor)	Input/Output	Power switch on (READY)	Pulse generation
A23-21 (TTA) - A23-31 (ETTA)	GR - SB	Transmission fluid temperature sensor	Input	Power switch on (IG), temperature 25°C (77°F)	3.6 to 4.6 V
A23-21 (TTA) - A23-31 (ETTA)	GR - SB	Transmission fluid temperature sensor	Input	Power switch on (IG), temperature 60°C (140°F)	2.2 to 3.2 V
A23-22 (ACCI) - G46-6 (E1)	P - W-B	ACC relay	Input	Power switch on (ACC)	11 to 14 V
A23-24 (MMT) - A23-23 (MMTG)	G - R	Motor temperature sensor	Input	Power switch on (IG), temperature 25°C (77°F)	3.6 to 4.6 V
A23-24 (MMT) - A23-23 (MMTG)	G - R	Motor temperature sensor	Input	Power switch on (IG), temperature 60°C (140°F)	2.2 to 3.2 V
A23-26 (GMT) - A23-27 (GMTG)	P - V	Generator temperature sensor	Input	Power switch on (IG), temperature 25°C (77°F)	3.6 to 4.6 V
A23-26 (GMT) - A23-27 (GMTG)	P - V	Generator temperature sensor	Input	Power switch on (IG), temperature 60°C (140°F)	2.2 to 3.2 V
A23-28 (VPA2) - A23-18 (EPA2)	GR - P	Accelerator pedal sensor assembly (for accelerator pedal position detection)	Input	Power switch on (IG), accelerator pedal released	1.0 to 2.2 V
A23-28 (VPA2) - A23-18 (EPA2)	GR - P		Input	Power switch on (IG), engine stopped, shift lever in P, accelerator pedal fully depressed	3.4 to 5.3 V
A23-30 (VPA) - A23-20 (EPA)	G - L	Accelerator pedal sensor assembly (for accelerator pedal position detection)	Input	Power switch on (IG), accelerator pedal released	0.4 to 1.4 V
A23-30 (VPA) - A23-20 (EPA)	G - L		Input	Power switch on (IG), engine stopped, shift lever in P, accelerator pedal fully depressed	2.6 to 4.5 V
A24-1 (PSFT) - G46-6 (E1)	L - W-B	Shift lever position sensor power source	Output	Power switch on (ACC)	7.5 to 14 V
A24-2 (BL) - G46-6 (E1)	BE - W-B	Back-up light	Output	Power switch on (IG), shift lever in R	11 to 14 V
A24-4 (+B1) - G46-6 (E1)	R - W-B	Power source	Input	Power switch on (IG)	11 to 14 V
A24-6 (MREL) - G46-6 (E1)	G - W-B	Main relay	Output	Power switch on (IG)	11 to 14 V
A24-7 (IGB) - G46-6 (E1)	B - W-B	Power source	Input	Power switch on (IG)	8.5 to 14 V
A24-12 (HSDN) - G46-6 (E1)	W - W-B	MG ECU shutdown signal	Output	Power switch on (READY)	0 to 1.5 V
A24-13 (ILK) - G46-6 (E1)	GR - W-B	Interlock switch	Input	Power switch on (IG), service plug grip installed correctly	0 to 1.5 V
A24-13 (ILK) - G46-6 (E1)	GR - W-B	Interlock switch	Input	Power switch on (IG), service plug grip not installed	11 to 14 V
A24-14 (DB2) - G46-6 (E1)	V - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever in D or S	7.5 to 14 V
A24-14 (DB2) - G46-6 (E1)	V - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever not in D or S	0 to 1.5 V
A24-15 (R) - G46-6 (E1)	LG - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever in R	7.5 to 14 V
A24-15 (R) - G46-6 (E1)	LG - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever not in R	0 to 1.5 V
A24-17 (PR) - G46-6 (E1)	R - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever in P or R	7.5 to 14 V
A24-17 (PR) - G46-6 (E1)	R - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever not in P or R	0 to 1.5 V
A24-20 (N) - G46-6 (E1)	G - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever in N	7.5 to 14 V
A24-20 (N) - G46-6 (E1)	G - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever not in N	0 to 1.5 V
A24-21 (P) - G46-6 (E1)	BE - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever in P	7.5 to 14 V
A24-21 (P) - G46-6 (E1)	BE - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever not in P	0 to 1.5 V
A24-26 (DB1) - G46-6 (E1)	W - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever in D or S	7.5 to 14 V
A24-26 (DB1) - G46-6 (E1)	W - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever not in D or S	0 to 1.5 V
A24-28 (ST1-) - G46-6 (E1)	LG - W-B	Stop light switch signal	Input	Power switch on (IG), brake pedal depressed	0 to 1.5 V
A24-28 (ST1-) - G46-6 (E1)	LG - W-B	Stop light switch signal	Input	Power switch on (IG), brake pedal released	11 to 14 V
A24-30 (HMCL) - G46-6 (E1)	W - W-B	MG ECU communication request signal	Input/Output	Power switch on (IG)	Pulse generation (Waveform 2)
A24-31 (HMCH) - G46-6 (E1)	B - W-B	MG ECU communication request signal	Input/Output	Power switch on (IG)	Pulse generation (Waveform 2)
A24-34 (PNB) - G46-6 (E1)	B - W-B	Shift lever position signal	Input	Power switch on (IG), shift lever in P or N	7.5 to 14 V
G46-1 (SMRG) - G46-5 (E01)	G - W-B	System main relay operation signal	Output	Power switch on (IG) → Power switch on (READY)	Pulse generation (Waveform 3)
G46-3 (SMRP) - G46-5 (E01)	W - W-B	System main relay operation signal	Output	Power switch on (IG) → Power switch on (READY)	Pulse generation (Waveform 3)
G46-4 (SMRB) - G46-5 (E01)	GR - W-B	System main relay operation signal	Output	Power switch on (IG) → Power switch on (READY)	Pulse generation (Waveform 3)
G46-7 (KOK) - G46-6 (E1)	BE - W-B	Vehicle proximity notification system permission signal	Output	Power switch on (IG)	0 to 2.0 V
G46-8 (INDR) - G46-6 (E1)	LG - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever in R	0 to 3.2 V
G46-8 (INDR) - G46-6 (E1)	LG - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever not in R	11 to 14 V
G46-9 (ST2) - G46-6 (E1)	L - W-B	Starter signal	Input	Power switch on (IG)	0 to 1.5 V
G46-10 (NORM) ←→ G46-6(E1)	LG - W-B	Normal mode switch (electric parking brake switch assembly) signal	Input	Power switch on (IG), normal mode switch (electric parking brake switch assembly) not operated	11 to 14 V
G46-10 (NORM) ←→ G46-6(E1)	LG - W-B		Input	Power switch on (IG), normal mode switch (electric parking brake switch assembly) operated	0 to 1.5 V
G46-32 (BTH+) - G46-6 (E1)	LG - W-B	Communication signal from battery voltage sensor to hybrid vehicle control ECU	Input	Power switch on (IG)	Pulse generation (Waveform 4)
G46-33 (BTH-) - G46-6 (E1)	W - W-B	Communication signal from battery voltage sensor to hybrid vehicle control ECU	Input	Power switch on (IG)	Pulse generation (Waveform 4)
G47-1 (M) - G46-6 (E1)	B - W-B	Transmission control	Input	Power switch on (IG), shift lever in S	11 to 14 V
G47-1 (M) - G46-6 (E1)	B - W-B	Transmission control	Input	Power switch on (IG), shift lever not in S	0 to 1.5 V
G47-3 (BATT) - G46-6 (E1)	B - W-B	Constant power source	Input	Power switch on (IG)	11 to 14 V
G47-3 (BATT) - G46-6 (E1)	B - W-B	Constant power source	Input	Power switch on (READY)	11 to 15.5 V
G47-6 (SPRT) - G46-6 (E1)	R - W-B	Sport mode switch (electric parking brake switch assembly) signal	Input	Power switch on (IG), sport mode switch (electric parking brake switch assembly) not operated	11 to 14 V
G47-6 (SPRT) - G46-6 (E1)	R - W-B		Input	Power switch on (IG), sport mode switch (electric parking brake switch assembly) operated	0 to 1.5 V
G47-7 (PLKC) - G46-6 (E1)	L - W-B	Shift lock release request signal	Output	Power switch on (READY), brake pedal depressed	11 to 14 V
G47-7 (PLKC) - G46-6 (E1)	L - W-B	Shift lock release request signal	Output	Power switch on (READY), brake pedal released	0 to 1.5 V
G47-8 (SFTD) - G46-6 (E1)	W - W-B	Transmission control	Input	Power switch on (IG), shift lever in S	11 to 14 V
G47-8 (SFTD) - G46-6 (E1)	W - W-B	Transmission control	Input	Power switch on (IG), shift lever in (-) or shift paddle switch LH (-) operated	0 to 1.5 V
G47-9 (SFTU) - G46-6 (E1)	LG - W-B	Transmission control	Input	Power switch on (IG), shift lever in S	11 to 14 V
G47-9 (SFTU) - G46-6 (E1)	LG - W-B	Transmission control	Input	Power switch on (IG), shift lever in (+) or shift paddle switch RH (+) operated	0 to 1.5 V
G47-10 (INDM) - G46-6 (E1)	GR - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever in S	0 to 3.2 V
G47-10 (INDM) - G46-6 (E1)	GR - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever not in S	11 to 14 V
G47-11 (INDD) - G46-6 (E1)	W - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever in D	0 to 3.2 V
G47-11 (INDD) - G46-6 (E1)	W - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever not in D	11 to 14 V
G47-12 (INDN) - G46-6 (E1)	R - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever in N	0 to 3.2 V
G47-12 (INDN) - G46-6 (E1)	R - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever not in N	11 to 14 V
G47-13 (INDP) - G46-6 (E1)	L - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever in P	0 to 3.2 V
G47-13 (INDP) - G46-6 (E1)	L - W-B	Shift position indicator signal	Input	Power switch on (IG), shift lever not in P	11 to 14 V
G47-14 (ABFS) - G46-6 (E1)	B - W-B	Airbag activation signal	Input	Power switch on (READY)	Pulse generation (Waveform 5)
G47-15 (EVSW) - G46-6 (E1)	G - W-B	EV drive mode switch (electric parking brake switch assembly) signal	Input	Power switch on (IG), EV drive mode switch (electric parking brake switch assembly) not operated	11 to 14 V
G47-15 (EVSW) - G46-6 (E1)	G - W-B		Input	Power switch on (IG), EV drive mode switch (electric parking brake switch assembly) operated	0 to 1.5 V
G47-24 (CA1L) - G46-6 (E1)	W - W-B	CAN communication signal	Input/Output	Power switch on (IG)	Pulse generation (Waveform 6)
G47-25 (CA1H) - G46-6 (E1)	L - W-B	CAN communication signal	Input/Output	Power switch on (IG)	Pulse generation (Waveform 6)
G47-28 (TC) - G46-6 (E1)	GR - W-B	Diagnosis terminal	Input	Power switch on (IG)	11 to 14 V
G47-29 (SI0) - G46-6 (E1)	L - W-B	HV battery cooling blower assembly operation signal	Output	Cooling fans operating	Pulse generation (Waveform 7)
G47-29 (SI0) - G46-6 (E1)	L - W-B	HV battery cooling blower assembly operation signal	Output	Cooling fans not operating	4.5 to 5.5 V
G47-30 (CA3N) - G46-6 (E1)	W - W-B	CAN communication signal	Input/Output	Power switch on (IG)	Pulse generation (Waveform 8)
G47-31 (CA3P) - G46-6 (E1)	G - W-B	CAN communication signal	Input/Output	Power switch on (IG)	Pulse generation (Waveform 8)

(a) Oscilloscope waveforms

HINT:

Oscilloscope waveform samples are provided here for informational purposes. Noise and fluttering waveforms have been omitted.

(1) Waveform 1 (Inverter water pump assembly signal)

Item

Content

Terminal

CH1: A23-13 (IWP) - G46-6 (E1)

CH2: A23-14 (NIWP) - G46-6 (E1)

Equipment Setting

5 V/DIV., 20 ms./DIV.

Condition

Power switch on (READY)

HINT:

The duty of the IWP signal and the frequency of the NIWP signal change according to the coolant (for inverter) temperature.

(2) Waveform 2 (MG ECU communication signal)

Item

Content

Terminal

CH1: A24-31 (HMCH) - G46-6 (E1)

CH2: A24-30 (HMCL) - G46-6 (E1)

Equipment Setting

1 V/DIV., 50 μs./DIV.

Condition

Power switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).

(3) Waveform 3 (System main relay operation signal)

Item

Content

Terminal

CH1: G46-3 (SMRP) - G46-5 (E01)

CH2: G46-4 (SMRB) - G46-5 (E01)

CH3: G46-1 (SMRG) - G46-5 (E01)

Equipment Setting

10 V/DIV., 200 ms./DIV.

Condition

Power switch on (IG) → Power switch on (READY)

(4) Waveform 4 (Communication signal from battery voltage sensor to hybrid vehicle control ECU)

Item

Content

Terminal

CH1: G46-32 (BTH+) - G46-6 (E1)

CH2: G46-33 (BTH-) - G46-6 (E1)

Equipment Setting

2 V/DIV., 500 μs./DIV.

Condition

Power switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).

(5) Waveform 5 (Airbag activation signal)

Item	Content
Terminal	G47-14 (ABFS) - G46-6 (E1)
Equipment Setting	5 V/DIV., 150 ms./DIV.
Condition	Power switch on (READY)

(6) Waveform 6 (CAN communication signal)

Item

Content

Terminal

CH1: G47-25 (CA1H) - G46-6 (E1)

CH2: G47-24 (CA1L) - G46-6 (E1)

Equipment Setting

1 V/DIV., 50 μs./DIV.

Condition

Power switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).

(7) Waveform 7 (HV battery blower fan operation signal)

Item	Content
Terminal	G47-29 (SI0) - G46-6 (E1)
Equipment Setting	10 V/DIV., 1 ms./DIV.
Condition	Cooling fans operating

HINT:

The waveform will vary with the operating speed of the battery cooling blower assembly.

(8) Waveform 8 (CAN communication signal)

Item

Content

Terminal

CH1: G47-31 (CA3P) - G46-6 (E1)

CH2: G47-30 (CA3N) - G46-6 (E1)

Equipment Setting

1 V/DIV., 50 μs./DIV.

Condition

Power switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).

BATTERY VOLTAGE SENSOR

Terminal No. (Symbol)	Wiring Color	Input/Output	Terminal Description	Condition	Specified Condition
y6-1 (TC0) - y6-7 (GC0)	G - G	IN	Intake air temperature sensor	Power switch on (IG), HV battery intake air temperature: -40 to 90°C (-40 to 194°F)	4.8 (-40°C (-40°F)) to 1.0 V (90°C (194°F))
y6-2 (TB2) - y6-8 (GB2)	R - R	IN	Battery temperature sensor 2	Power switch on (IG), HV battery temperature: -40 to 90°C (-40 to 194°F)	4.8 (-40°C (-40°F)) to 1.0 V (90°C (194°F))
y6-3 (TB1) - y6-9 (GB1)	W - W	IN	Battery temperature sensor 1	Power switch on (IG), HV battery temperature: -40 to 90°C (-40 to 194°F)	4.8 (-40°C (-40°F)) to 1.0 V (90°C (194°F))
y6-4 (TB0) - y6-10 (GB0)	L - L	IN	Battery temperature sensor 0	Power switch on (IG),, HV battery temperature: -40 to 90°C (-40 to 194°F)	4.8 (-40°C (-40°F)) to 1.0 V (90°C (194°F))
y6-5 (IB0) - y6-12 (GIB)	Y - B	IN	Battery current sensor	Power switch on (IG)	0.5 to 4.5 V
y6-6 (VIB) - y6-12 (GIB)	BR - B	OUT	Power source for battery current sensor	Power switch on (IG)	4.5 to 5.5 V
K17-1 (IGCT) - K17-5 (GND)	BE - W-B	IN	Control signal	Power switch on (IG)	11 to 14 V
K17-2 (BTH+) - K17-5 (GND)	GR - W-B	OUT	Serial communication	Power switch on (IG)	Pulse generation (waveform 1)
K17-3 (BTH-) - K17-5 (GND)	W - W-B	OUT	Serial communication	Power switch on (IG)	Pulse generation (waveform 2)
K17-5 (GND) - Body ground	W-B	-	Ground	Always (continuity check)	Below 1 Ω
K17-8 (FP0) - K17-5 (GND)	B - W-B	IN	Battery cooling blower monitor signal	Battery cooling blower assembly stopped	0 Hz
K17-8 (FP0) - K17-5 (GND)	B - W-B	IN	Battery cooling blower monitor signal	Battery cooling blower assembly operating (Active Test of cooling fan being performed)	Pulse generation (waveform 3)

(a) Oscilloscope waveforms

HINT:

Oscilloscope waveform samples are provided here for informational purposes. Noise and fluttering waveforms have been omitted.

(1) Waveform 1 (Serial communication)

Item	Content
Terminal	K17-2 (BTH+) - K17-5 (GND)
Equipment Setting	2 V/DIV., 500 μs/DIV.
Condition	Power switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).

(2) Waveform 2 (Serial communication)

Item	Content
Terminal	K17-3 (BTH-) - K17-5 (GND)
Equipment Setting	2 V/DIV., 500 μs/DIV.
Condition	Power switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).

(3) Waveform 3 (Battery cooling blower monitor signal)

Item	Content
Terminal	K17-8 (FP0) - K17-5 (GND)
Equipment Setting	2 V/DIV., 2 ms/DIV.
Condition	Battery cooling blower assembly operating (Active Test of cooling fan being performed)

HINT:

The frequency of the waveform will vary with the operating speed of the battery cooling blower assembly.

System Diagram

Transmission Control Switch Circuit

See More:

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Ua80e Automatic Transaxle Fluid: Replacement
REPLACEMENT CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during automatic transaxle fluid replacement are shown below. Necessary Procedures After Parts Removed/Inst ...

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Terminals Of Ecu

System Diagram

Transmission Control Switch Circuit

See More:

Toyota Avalon (XX50) 2019-2022 Owners Manual

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual