INSTALLATION PROCEDURE 1. INSTALL INVERTER WATER PUMP ASSEMBLY
(b) Temporarily install the inverter water pump assembly to the fan shroud assembly with the 2 bolts. (c) Fully tighten the 2 bolts. Torque: 7.0 N·m {71 kgf·cm, 62 in·lbf} NOTICE: As overtightening the bolts may damage the fan shroud assembly, make sure to use a torque wrench. (d) Connect the inverter water pump assembly connector. NOTICE: If a dustproof cap is installed to the inverter water pump assembly connector, do not remove it until the connector is to be connected. 2. ADD COOLANT (for Inverter) Click here 3. INSPECT FOR COOLANT LEAK (for Inverter) Click here 4. INSTALL NO. 1 ENGINE UNDER COVER Click here 5. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH Click here 6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Air Conditioning Unit(for 2gr-fks): Components
COMPONENTS ILLUSTRATION *1 FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY - - Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) N*m (kgf*cm, ft.*lbf): Specified torque ILLUSTRATION *1 INLET HEATER WATER HOSE *2 NO. 2 AIR ...