INSTALLATION PROCEDURE 1. INSTALL GENERATOR ASSEMBLY (a) Install the generator assembly with the 2 bolts. Torque: 43 N·m {438 kgf·cm, 32 ft·lbf}
(c) Install the wire harness clamp bracket with the 2 bolts. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (d) Engage the 3 wire harness clamps. (e) Connect the camshaft timing oil control solenoid assembly connector. (f) Connect the compressor assembly with magnetic clutch connector. (g) Connect the generator assembly connector. (h) Connect the wire harness to terminal B with the nut. Torque: 9.8 N·m {100 kgf·cm, 87 in·lbf} (i) Close the terminal cap. 2. INSTALL V-RIBBED BELT Click here 3. INSTALL V-BANK COVER SUB-ASSEMBLY Click here 4. INSTALL RADIATOR ASSEMBLY Click here 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Brake Pedal(for Gasoline Model): Adjustment
ADJUSTMENT PROCEDURE 1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT (a) Remove the front door scuff plate LH. Click here (b) Remove the cowl side trim sub-assembly LH. Click here (c) Remove the No. 1 instrument panel under cover sub-assembly. Click here (d) Remove the accelerator pedal pad. Click here (e) ...