Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Precaution

PRECAUTION

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

  • After the engine switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) battery terminal.
  • When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the terminal is reconnected.

    System Name

    See Procedure

    Lane Departure Alert System (w/ Steering Control)

    Intelligent Clearance Sonar System

    Parking Assist Monitor System

    Panoramic View Monitor System

    Pre-collision System

    Lighting System (for Gasoline Model with Cornering Light)

NOTICE:

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.
  • When replacing the DCM (telematics transceiver), be sure to replace it with a new one (w/ Manual (SOS) Switch).

PRECAUTION FOR AUDIO AND VISUAL SYSTEM

(a) If any of the following parts are replaced, refer to Initialization in Repair Instruction.

Click here

  • Radio and display receiver assembly*1
  • DCM (telematics transceiver)*2
  • *1: After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, SiriusXM radio ID registration is necessary (w/ SXM Function).

    *2: w/ Manual (SOS) Switch

    Portable Player cannot be Registered

    Problem Symptoms Table

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Audio And Visual System(for Gasoline Model): Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter
    DESCRIPTION The stereo component amplifier assembly receives a vehicle speed signal from the combination meter assembly to control the ASL function. HINT: A voltage of 12 V or 5 V is output from each ECU and then input to the combination meter assembly. The signal is changed to a pulse signal at the ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0317