Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Utility

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Power Source, Network / Networking / Can Communication System(for Gasoline Model) / Utility

UTILITY

INITIALIZE THE CONNECTION INFORMATION OF A GATEWAY FUNCTION EQUIPPED ECU (BUS MONITOR ECU)

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(d) Enter the following menus:

for Body Electrical / Central Gateway / Utility / Initialization

Body Electrical > Central Gateway > Utility

Tester Display
Initialization

for Body Electrical / Main Body / Utility / Initialization

Body Electrical > Main Body > Utility

Tester Display
Initialization

(e) Initialize the ECU.

Tire Pressure Monitor ECU Communication Stop Mode

Can Communication System(for Hv Model)

See More:

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Camshaft Oil Control Solenoid: Installation
INSTALLATION PROCEDURE 1. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2) (a) Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration. NOTICE: Do not damage the O-ring. *1 O-ring (b) Apply adh ...

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Utility

Tire Pressure Monitor ECU Communication Stop Mode

Can Communication System(for Hv Model)

See More:

Toyota Avalon (XX50) 2019-2022 Owners Manual

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual