Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Utility

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Power Source, Network / Networking / Can Communication System(for Hv Model) / Utility

UTILITY

INITIALIZE THE CONNECTION INFORMATION OF A GATEWAY FUNCTION EQUIPPED ECU (BUS MONITOR ECU)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus:

  • for Body Electrical / Central Gateway / Utility / Initialization
Body Electrical > Central Gateway > Utility

Tester Display

Initialization
  • for Body Electrical / Main Body / Utility / Initialization
Body Electrical > Main Body > Utility

Tester Display

Initialization

(e) Initialize the ECU.

    Tire Pressure Monitor ECU Communication Stop Mode

    Lin Communication System(for Gasoline Model)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Navigation System(for Gasoline Model): Start Up Signal Circuit between Radio Receiver Assembly and Navigation ECU
    DESCRIPTION This circuit includes the navigation ECU and radio and display receiver assembly. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NAVIGATION ECU) (a) Disconnect the G1 radio and display receiver assembly connector. (b) Disconnect the G13 nav ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0299