REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during central gateway ECU (network gateway ECU) removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing. Click here Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing. Click here PROCEDURE 1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Click here 2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Click here 3. REMOVE ECU INTEGRATION BOX RH (a) Disconnect each connector. (b) Disengage the 2 clamps.
(c) Remove the nut, bolt and ECU integration box RH. 4. REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (a) Disengage the 2 claws and remove the central gateway ECU (network gateway ECU) as shown in the illustration.
NOTICE:
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Luggage Compartment Door Lock: Installation
INSTALLATION PROCEDURE 1. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY (a) Install the luggage door lock control cable sub-assembly. 2. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (a) Connect the cable. (b) Engage the 2 claws to install the luggage compartment door inside handle. (c) Enga ...