DESCRIPTION This DTC does not indicate a malfunction. The power steering ECU (rack and pinion power steering gear assembly) stores this DTC when it determines that torque sensor zero point calibration has not completed.
CAUTION / NOTICE / HINT NOTICE: If the rack and pinion power steering gear assembly has been replaced, perform assist map writing and torque sensor zero point calibration. Click here PROCEDURE
(a) Clear the DTCs. (Step 1) Chassis > EMPS > Clear DTCs(b) Calibrate the torque sensor zero point. (Step 2) Chassis > EMPS > Utility
(c) Check for DTCs. (Step 3) Chassis > EMPS > Trouble CodesHINT: If DTCs are output, perform steps (1) to (3) two more times.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Motor Generator Control System: Drive Motor "A" Phase U-V-W Current Sensor Signal Compare Failure (P0BFD62,P1C671F)
DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs indicate that the current sensor value is abnormal. The cause of this malfunction may be one of the following: Internal inverter malfunction Current sensor malfunction Inverter with converter assembly internal circuit malfunction DESCRIPTION DTC No. Det ...