Components COMPONENTS ILLUSTRATION
Installation INSTALLATION PROCEDURE 1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU (a) Engage the 2 claws to install the multiplex tilt and telescopic ECU.
(b) Connect the connector. 2. INSTALL LOWER STEERING COLUMN COVER Click here 3. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM Click here Removal REMOVAL PROCEDURE 1. CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS Click here 2. REMOVE LOWER STEERING COLUMN COVER Click here 3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU (a) Disconnect the connector.
(b) Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the multiplex tilt and telescopic ECU. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Start Function, Hv Model): Brake Signal Malfunction (B2284)
DESCRIPTION This DTC is stored when the brake signal sent via direct line and the brake signal sent via CAN communication do not match. DTC No. Detection Item DTC Detection Condition Trouble Area Note B2284 Brake Signal Malfunction The brake signal sent via direct line and the brake signal sent via ...