INSPECTION PROCEDURE 1. INSPECT STEERING PAD SWITCH ASSEMBLY (a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
HINT: If the result is not as specified, replace the steering pad switch assembly. (b) Check the illumination.
(1) Connect a positive (+) lead from the auxiliary battery to terminal 1 (ILL+2) and a negative (-) lead to terminal 6 (ILL-2) of the steering pad switch assembly connector. (2) Check that the steering pad switch assembly illumination illuminates. OK: The steering pad switch assembly illumination illuminates. HINT: If the result is not as specified, replace the steering pad switch assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Power Mirror Control System(for Hv Model Without Memory): System Diagram
SYSTEM DIAGRAM ELECTRICAL REMOTE CONTROL MIRROR FUNCTION MIRROR HEATER FUNCTION Communication Table Sender Receiver Signal Communication Method Radio and Display Receiver Assembly Air Conditioning Amplifier Assembly Mirror heater switch (rear window defogger switch) signal CAN ...