INSPECTION PROCEDURE 1. INSPECT FRONT STABILIZER LINK ASSEMBLY
(b) Inspect the dust cover. (1) Check that the dust cover is not cracked and that there is no grease on it. HINT: If the dust cover is cracked or there is grease on it, replace the front stabilizer link assembly with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Flow Shutting Valve: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during flow shutting valve (water by-pass hose assembly) removal/installation are shown below. Necessary Proce ...