Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Absorber Control Actuator(for Rear Side)

On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT ABSORBER CONTROL ACTUATOR

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

for LH Side

Tester Connection

Condition

Specified Condition

1 (RAL+) - 3 (RAL-)

15 to 25°C

3.3 to 3.7 Ω

for RH Side

Tester Connection

Condition

Specified Condition

1 (RAR+) - 3 (RAR-)

15 to 25°C

3.3 to 3.7 Ω

If the result is not as specified, replace the rear shock absorber assembly.

*A

for LH Side

*B

for RH Side

*a

Component without harness connected

(Absorber Control Actuator)

    Absorber Control Actuator(for Front Side)

    Absorber Control Switch

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Pre-collision System(for Gasoline Model): Utility
    UTILITY NOTICE: When replacing a millimeter wave radar sensor assembly, replace it with a new one. When the millimeter wave radar sensor assembly is replaced with a new one, it stores the country specification information received from the driving support ECU assembly. If a millimeter wave radar sen ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0281