CAUTION / NOTICE / HINT HINT:
PROCEDURE
(a) Measure the voltage of the battery. Standard Voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the battery before proceeding.
(a) Check the ECUs connected to the CAN bus. Click here
(a) Check for and write down any DTCs and Freeze Frame Data. for DTC Check / Clear: Click here for Freeze Frame Data: Click here Chassis > Air suspension > Trouble Codes(b) Clear the DTCs and Freeze Frame Data. for DTC Check / Clear: Click here for Freeze Frame Data: Click here Chassis > Air suspension > Clear DTCs(c) Recheck for DTCs. Chassis > Air suspension > Trouble Codes
(a) Refer to Terminals of ECU. Click here (b) Refer to Data List / Active Test. Click here
(a) Proceed to Diagnostic Trouble Code Chart. Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Entry Function, Gasoline Model): Terminals Of Ecu
TERMINALS OF ECU CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (a) Disconnect the G40 certification ECU (smart key ECU assembly) connector. (b) Measure the voltage and resistance according to the value(s) in the table below. Tester Connection Wiring Color Input/Output Terminal Description Conditi ...