DESCRIPTION When "Change Wheel" is selected on the multi-information display and the "OK" switch (steering pad switch assembly) is pushed and held, the system enters ID registration mode and the tire pressure warning light blinks 3 times. The main body ECU (multiplex network body ECU) receives signals from the combination meter assembly via the CAN communication line. WIRING DIAGRAM PROCEDURE
(a) Perform Test Mode Procedure (Tire Pressure Warning Reset Switch Check (DTC C2198)). Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Intake Manifold: Installation
INSTALLATION PROCEDURE 1. INSTALL STUD BOLT HINT: If a stud bolt is deformed or the threads are damaged, replace it. (a) Using an E6 "TORX" socket wrench, install the 2 stud bolts to the intake manifold. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} 2. INSTALL NO. 1 INTAKE MANIFOLD TO HEAD GASKET (a) Ins ...