ADJUSTMENT CAUTION / NOTICE / HINT
HINT:
PROCEDURE 1. INSPECT FRONT DOOR (a) Check that the clearance measurements of areas a through n are within each standard range. Standard Clearance
2. ADJUST FRONT DOOR NOTICE: Make sure to turn the engine switch (for Gasoline Model) or power switch (for HV Model) off before adjusting the door lock strikers.
(c) Tighten the 4 hinge bolts on the vehicle body after adjustment. Torque: 26 N·m {265 kgf·cm, 19 ft·lbf} (d) Loosen the 4 hinge bolts on the door and adjust the door position. (e) Tighten the 4 hinge bolts on the door after adjustment. Torque: 26 N·m {265 kgf·cm, 19 ft·lbf}
(g) Using a brass bar and a hammer, hit the striker to adjust its position. (h) Using a T40 "TORX" socket wrench, tighten the 2 striker mounting screws after adjustment. Torque: 23 N·m {235 kgf·cm, 17 ft·lbf} (i) Install the front fender seal with the 4 clips. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lane Departure Alert System (w/ Steering Control)(for Hv Model): Vehicle Speed Tolerance Malfunction (C1AA2)
DESCRIPTION The forward recognition camera receives vehicle speed tolerance signals from the combination meter assembly. If the combination meter assembly detects a vehicle speed tolerance malfunction signal, it informs the forward recognition camera via CAN communication, and DTC C1AA2 is stored. D ...