INSPECTION PROCEDURE 1. INSPECT FUEL LID LOCK WITH MOTOR ASSEMBLY (a) Check the operation of the fuel lid lock with motor assembly (motor operation). (1) Apply auxiliary battery voltage to the fuel lid lock with motor assembly connector, and check the operation of the fuel lid lock with motor assembly.
OK:
If the result is not as specified, replace the fuel lid lock with motor assembly. (b) Check the operation of the fuel lid lock with motor assembly (fuel lid courtesy switch). (1) Measure the resistance according the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the fuel lid lock with motor assembly. (c) Measure the shaft stroke. Standard:
If the result is not as specified, replace the fuel lid lock with motor assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Automatic Transaxle System: Pressure Control Solenoid "D" Circuit Short to Battery (P271312)
DESCRIPTION Refer to DTC P27137F. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P271312 Pressure Control Solenoid "D" Circuit Short to Battery While the engine is running, a short to +B is detected in the solenoid (SLT) valve circuit for 1 second (1-trip dete ...