INSTALLATION PROCEDURE 1. INSTALL FUEL LID LOCK WITH MOTOR ASSEMBLY (a) Apply MP grease to the sliding parts of the fuel lid lock with motor assembly. (b) Connect the connector. (c) Engage the 2 claws. (d) Engage the clamp to install the fuel lid lock with motor assembly. 2. INSTALL FUEL FILLER OPENING LID LOCK RETAINER (a) Install the fuel filler opening lid lock retainer as indicated by the arrows, the order shown in the illustration.
3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH Click here 4. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD Click here 5. INSTALL REAR FLOOR FINISH PLATE Click here 6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Click here 7. INSTALL SPARE WHEEL COVER ASSEMBLY Click here 8. INSTALL BAGGAGE HOLDER NET Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Combination Light Assembly: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR COMBINATION LIGHT ASSEMBLY (a) Engage the grommet. (b) Engage the 3 guides and pin to temporarily install the rear combination light as ...