Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT FUEL LID OPENER SWITCH

(a) Check the switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 - 5

Pressed (On)

Below 1 Ω

2 - 5

Not pressed (Off)

10 kΩ or higher

If the result is not as specified, replace the fuel lid opener switch.

*a

Component without harness connected

(Fuel Lid Opener Switch)

(b) Check the switch illumination.

(1) Apply auxiliary battery voltage to the switch connector and check that the fuel lid opener switch illuminates.

OK:

Auxiliary Battery Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 6

Auxiliary battery negative (-) → Terminal 1

Illumination illuminates

If the result is not as specified, replace the fuel lid opener switch.

    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Battery or Open (P022015)
    DESCRIPTION Refer to DTC P012011. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P022015 Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Battery or Open The output voltage of VTA2 is higher than 4.75 V, and VTA1 is less than 2.367 V for 2 seconds or ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0109