DISASSEMBLY PROCEDURE 1. REMOVE HOOD TO RADIATOR SUPPORT SEAL
(b) Remove the 10 hood to radiator support seal clips from the hood to radiator support seal. 2. REMOVE HOOD INSULATOR
(b) Disengage the 2 guides to remove the hood insulator as shown in the illustration.
3. REMOVE WASHER NOZZLE SUB-ASSEMBLY Click here 4. DISCONNECT WASHER HOSE ASSEMBLY
(b) Disengage the grommet to disconnect the washer hose assembly. 5. REMOVE HOOD SUPPORT ASSEMBLY LH Click here 6. REMOVE HOOD STAY BRACKET LH Click here 7. REMOVE HOOD SUPPORT ASSEMBLY RH HINT: Use the same procedure as for the LH side. 8. REMOVE HOOD STAY BRACKET RH HINT: Use the same procedure as for the LH side. |
Toyota Avalon Service & Repair Manual > Oil Cooler: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transmission oil cooler removal/installation are shown below. Necessary Procedures After Parts Removed/I ...