Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Removal

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during grille shutter removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

*: Applies only for when removing and installing or replacing the television camera assembly.

Front television camera assembly, front bumper assembly or radiator grille

  • Television camera view adjustment
  • Television camera assembly optical axis adjustment (Back camera position setting)*

Panoramic View Monitor System

for Initialization

for Calibration

Front bumper assembly

  • Measurement of ultrasonic sensor detection angle
  • Ultrasonic sensor detection angle registration
  • Intelligent Clearance Sonar System
  • Intuitive Parking Assist System

  • Swing grill actuator assembly
  • Radiator shutter sub-assembly

Change grille shutter control mode and/or perform initialization

Grille Shutter System

PROCEDURE

1. REMOVE FRONT BUMPER ASSEMBLY

Click here

2. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE LH

(a) Disengage the 2 claws to remove the front radiator side air guide plate LH.

3. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH

(a) Disengage the 2 claws to remove the front radiator side air guide plate RH.

4. REMOVE THERMISTOR ASSEMBLY

Click here

5. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY

(a) Disconnect the connector.

(b) Disengage the clamp.

(c) Remove the 3 bolts.

(d) Disengage the 2 guides to remove the radiator shutter sub-assembly as shown in the illustration.

Remove in this Direction

    Reassembly

    Luggage Compartment Door Outside Garnish

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Power Window Control System(for Gasoline Model): Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch
    DESCRIPTION If the manual up and down functions operate normally but the auto up and down functions do not, the power window control system may be in fail-safe mode. If power window initialization has not been performed, the auto up and down functions will not operate. Click here WIRING DIAGRAM CAUT ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.025