Components COMPONENTS ILLUSTRATION 
Disassembly DISASSEMBLY PROCEDURE 1. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE Click here
Installation INSTALLATION PROCEDURE 1. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY (a) Install 4 new clips to the luggage compartment door outside garnish. (b) Engage the 4 clips as shown in the illustration. 
(c) Install the luggage compartment door outside garnish sub-assembly with the 2 screws. 2. INSTALL NO. 2 BACK DOOR OUTSIDE GARNISH
3. INSTALL REAR LIGHT ASSEMBLY LH Click here
4. INSTALL REAR LIGHT ASSEMBLY RH HINT: Use the same procedure as for the LH side. Reassembly REASSEMBLY PROCEDURE 1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE Click here
Removal REMOVAL PROCEDURE 1. REMOVE REAR LIGHT ASSEMBLY LH Click here
2. REMOVE REAR LIGHT ASSEMBLY RH HINT: Use the same procedure as for the LH side. 3. REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH
4. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY (a) Apply protective tape around the luggage compartment door outside garnish sub-assembly. 
(c) Using a moulding remover, disengage the 4 clips and remove the luggage compartment door outside garnish sub-assembly as shown in the illustration. 
(d) Remove the 4 clips from the luggage compartment door outside garnish. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Panoramic View Monitor System(for Hv Model): CAN Communication Failure (Message Registry) (U1000)
DESCRIPTION If DTC U1000 is stored frequently, duplicate the problem symptoms and perform troubleshooting again even if the DTC is not output when rechecking for DTCs. Parking Assist ECU DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from U1000 CAN Communication Failure (Mess ...
