Components COMPONENTS ILLUSTRATION
Inspection INSPECTION PROCEDURE 1. INSPECT HIGH PITCHED HORN ASSEMBLY
2. INSPECT LOW PITCHED HORN ASSEMBLY
Installation INSTALLATION PROCEDURE 1. INSTALL LOW PITCHED HORN ASSEMBLY (a) Connect the connector. (b) Install the low pitched horn assembly with the bolt. Torque: 19.5 N·m {199 kgf·cm, 14 ft·lbf} 2. INSTALL HIGH PITCHED HORN ASSEMBLY (a) Connect the connector. (b) Install the high pitched horn assembly with the bolt. Torque: 19.5 N·m {199 kgf·cm, 14 ft·lbf} 3. INSTALL COOL AIR INTAKE DUCT SEAL Click here Removal REMOVAL PROCEDURE 1. REMOVE COOL AIR INTAKE DUCT SEAL Click here 2. REMOVE HIGH PITCHED HORN ASSEMBLY
(b) Disconnect the connector to remove the high pitched horn assembly. 3. REMOVE LOW PITCHED HORN ASSEMBLY
(b) Disconnect the connector to remove the low pitched horn assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Power Window Control System(for Hv Model): Rear Power Window RH Auto Up / Down Function does not Operate with Rear Power Window Switch RH
DESCRIPTION If the manual up and down functions operate normally but the auto up and down functions do not, the power window control system may be in fail-safe mode. If power window initialization has not been performed, the auto up and down functions will not operate. Click here WIRING DIAGRAM CAUT ...