Toyota Avalon Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT AUTO HIGH BEAM SWITCH

*a

Component without harness connected

(Auto High Beam Switch)

(a) Check the switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

5 (+B) - 2 (E)

Auto high beam switch not pressed

10 kΩ or higher

Auto high beam switch pressed

Below 1 Ω

If the result is not as specified, replace the auto high beam switch.

(b) Inspect the switch illumination.

(1) Apply auxiliary battery voltage to the auto high beam switch and check that the switch illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 6 (ILL+)

Auxiliary battery negative (-) → Terminal 1 (ILL-)

Illuminates

If the result is not as specified, replace the auto high beam switch.

(c) Inspect the indicator illumination.

(1) Apply auxiliary battery voltage to the auto high beam switch and check that the indicator illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 3 (IND+)

Auxiliary battery negative (-) → Terminal 4 (AZBI)

Illuminates

If the result is not as specified, replace the auto high beam switch.

    Components

    Installation

    See More:

    Toyota Avalon Service & Repair Manual > Telematics System(for Gasoline Model): System Description
    SYSTEM DESCRIPTION OUTLINE (a) Toyota Entune Remote Connect, which enables the user to check the vehicle status and operate the vehicle from a remote location, has been adopted. (b) Toyota Entune Remote Connect is available by installing a dedicated smartphone application after entering a service co ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0158