Components COMPONENTS ILLUSTRATION
Inspection INSPECTION PROCEDURE 1. INSPECT CENTER STOP LIGHT SET
(a) Apply auxiliary battery voltage to the center stop light set and check that the light illuminates. OK:
If the result is not as specified, replace the center stop light set. Installation INSTALLATION PROCEDURE 1. INSTALL CENTER STOP LIGHT SET (a) Engage the 2 guides as shown in the illustration.
(b) Connect the connector. (c) Engage the 2 claws as shown in the illustration to install the center stop light set.
Removal REMOVAL PROCEDURE 1. REMOVE CENTER STOP LIGHT SET (a) Using a moulding remover, disengage the 2 claws as shown in the illustration.
(c) Disengage the 2 guides as shown in the illustration to remove the center stop light set.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Gasoline Model): ABS Warning Light Remains ON
DESCRIPTION The skid control ECU (brake actuator assembly) is connected to the combination meter assembly via CAN communication. If any of the following is detected, the ABS warning light remains on: The skid control ECU (brake actuator assembly) connector is disconnected from the skid control ECU ( ...