DESCRIPTION The steering sensor receives the turn signal switch information and controls the turn signal lights. WIRING DIAGRAM PROCEDURE
(a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Chassis / Steering Angle Sensor / Data List. (e) Read the Data List according to the display on the Techstream. Chassis > Steering Angle Sensor > Data List
OK: Normal conditions listed above are displayed.
(a) Remove the turn signal switch. Click here (b) Inspect the turn signal switch. Click here
(a) Remove the steering wheel switch housing. Click here (b) Inspect the steering wheel switch housing. Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Automatic Transaxle System: Terminals Of Ecm
TERMINALS OF ECM ECM HINT: The standard voltage and resistance of each ECM terminal is shown in the table below. In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminal ...