DESCRIPTION The main body ECU (multiplex network body ECU) controls the high beam headlights. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
PROCEDURE
(a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Active Test. (e) Perform the Active Test according to the display on the Techstream. Body Electrical > Main Body > Active Test
OK: High beam headlights illuminate.
(a) Inspect the DIM relay. Click here
(a) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the G33 main body ECU (multiplex network body ECU) connector. (b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Rear Axle Hub: Components
COMPONENTS ILLUSTRATION *1 NO. 2 PARKING BRAKE WIRE ASSEMBLY *2 REAR AXLE HUB AND BEARING ASSEMBLY *3 REAR DISC *4 REAR DISC BRAKE CALIPER ASSEMBLY *5 REAR FLEXIBLE HOSE *6 REAR DISC BRAKE DUST COVER SUB-ASSEMBLY Tightening torque for "Major areas involving basic vehicle performance such as moving/t ...