Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for the RH side and LH side.
• The following procedure is for the LH side.

PROCEDURE

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Engage the grommet.

(b) Engage the 3 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.

*a	Pin
*b	Guide
	Install in this Direction

(c) Install the rear combination light assembly with the 2 screws.

(d) Remove the protective tape.

(e) Engage the clamp.

(f) Connect the connector.

2. INSTALL REAR COMBINATION LIGHT COVER

(a) Engage the 5 claws to install the rear combination light cover as shown in the illustration.

Install in this Direction

3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH (for LH Side)

Click here

4. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH (for RH Side)

Click here

5. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for RH Side)

for HV Model:

Click here

6. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD

Click here

7. INSTALL REAR FLOOR FINISH PLATE

Click here

8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Click here

9. INSTALL BAGGAGE HOLDER NET

Click here

10. INSTALL SPARE WHEEL COVER ASSEMBLY

Click here