Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Exterior / Lighting (ext) / Side Turn Signal Light Assembly / Inspection

INSPECTION

PROCEDURE

1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

*a

Component without harness connected

(Side Turn Signal Light Assembly LH)

(a) Apply auxiliary battery voltage to the side turn signal light assembly LH and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 2 (B)

Auxiliary battery negative (-) → Terminal 1 (E)

Side turn signal light illuminates

If the result is not as specified, replace the side turn signal light assembly LH.

2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

*a

Component without harness connected

(Side Turn Signal Light Assembly RH)

(a) Apply auxiliary battery voltage to the side turn signal light assembly RH and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 2 (B)

Auxiliary battery negative (-) → Terminal 1 (E)

Side turn signal light illuminates

If the result is not as specified, replace the side turn signal light assembly RH.

    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Outer Mirror Switch: Installation
    INSTALLATION PROCEDURE 1. INSTALL OUTER MIRROR SWITCH ASSEMBLY (a) Engage the 5 claws to install the outer mirror switch assembly as shown in the illustration. Install in this Direction 2. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL Click here ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0124