REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during side turn signal light assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
HINT:
PROCEDURE 1. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER Click here 2. REMOVE OUTER MIRROR Click here 3. REMOVE OUTER MIRROR COVER Click here 4. REMOVE VISOR HOUSING Click here 5. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Hv Model): SLA Linear Solenoid (C1211,C1212,C1225,C1226)
DESCRIPTION The linear solenoids SLA and SLR control the regulator based on signals from the skid control ECU (brake booster with master cylinder assembly) and produce servo pressure in accordance with the vehicle condition. When the system is normal, the switching solenoid SGH is opened to allow br ...
