INSTALLATION PROCEDURE 1. INSTALL STOP LIGHT SWITCH ASSEMBLY (a) Insert the stop light switch assembly until the threaded sleeve hits the pedal as shown in the illustration.
NOTICE: When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not pushed in. (b) Turn the stop light switch assembly 1/4 clockwise as shown in the illustration to install it.
Torque: 1.5 N·m {15 kgf·cm, 13 in·lbf} or less NOTICE: When inserting the stop light switch assembly, support the pedal from behind so that the pedal is not pushed in. (c) Connect the connector. (d) Check the protrusion of the plunger. Protrusion of the Plunger
(e) If the protrusion is not as specified, recheck the stop light switch assembly installation and perform brake pedal adjustment if necessary. for Gasoline Model: Click here for HV Model: Click here NOTICE: Do not depress or support the brake pedal. 2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Power Steering System(for Gasoline Model): Parts Location
PARTS LOCATION ILLUSTRATION *A w/ Adaptive Variable Suspension System - - *1 DRIVE MODE SELECT SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) *2 FORWARD RECOGNITION CAMERA *3 BRAKE ACTUATOR ASSEMBLY - SKID CONTROL ECU *4 ECM *5 RACK AND PINION POWER STEERING GEAR ASSEMBLY - POWER STEERING ECU -POWE ...