Components COMPONENTS ILLUSTRATION
Installation INSTALLATION CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. INSTALL OUTER MIRROR COVER (a) Engage the 6 claws to install the outer mirror cover as shown in the illustration.
2. INSTALL OUTER MIRROR Click here Removal REMOVAL CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. REMOVE OUTER MIRROR Click here 2. REMOVE OUTER MIRROR COVER (a) Pull the outer mirror cover as shown in the illustration to disengage the 3 claws.
NOTICE: As the claws may be damaged, make sure not to apply force in any direction other than shown in the illustration. HINT: If it is difficult to disengage the claws, disengage them using a screwdriver with its tip wrapped with protective tape. (b) Pull the outer mirror cover as shown in the illustration to disengage the 3 claws and remove the outer mirror cover.
NOTICE: As the claws may be damaged, make sure not to apply force in any direction other than shown in the illustration. HINT: If it is difficult to disengage the claws, disengage them using a screwdriver with its tip wrapped with protective tape. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Can Communication System(for Hv Model): Steering Angle Sensor Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Steering Angle Sensor Communication Stop Mode Any of the following conditions are met: Communication stop for "Spiral cable (Steering Angle Sensor)" is indicated on the "Communication Bus Check" screen of the Techstream. Click here Communication stop h ...