Components COMPONENTS ILLUSTRATION
Inspection INSPECTION PROCEDURE 1. INSPECT OUTER MIRROR RH
(b) Check the operation of the outer rear view mirror indicator. NOTICE: Do not apply a voltage of more than 4.5 V. (1) Connect 3 new 1.5 V dry-cell batteries in series.
2. INSPECT OUTER MIRROR LH
(b) Check the operation of the outer rear view mirror indicator. NOTICE: Do not apply a voltage of more than 4.5 V. (1) Connect 3 new 1.5 V dry-cell batteries in series.
Installation INSTALLATION CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. INSTALL OUTER MIRROR (a) Connect each connector.
Removal REMOVAL CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. REMOVE OUTER MIRROR (a) Apply protective tape to the areas shown in the illustration.
(b) Push the upper part of the mirror surface and tilt it. NOTICE: Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface. (c) Using a moulding remover and screwdriver, disengage the 8 claws as shown in the illustration.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Luggage Compartment Door Opener Inner Switch: Removal
REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE LH Click here 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Click here 3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Click here 4. REMOVE INSTRUMENT SIDE PANEL LH Click here 5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here 6. ...