INSTALLATION CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY NOTICE: Do not touch the speaker cone. (a) Connect the connector. (b) Engage the 2 guides to temporarily install the front No. 1 speaker assembly. (c) Install the front No. 1 speaker assembly with the 4 screws.
HINT: Install the screws in the order shown in the illustration. 2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Click here 3. INSTALL COURTESY LIGHT ASSEMBLY Click here 4. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side) Click here 5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side) Click here 6. INSTALL FRONT DOOR TRIM POCKET COVER Click here 7. INSTALL FRONT DOOR ARMREST COVER SUB-ASSEMBLY Click here 8. INSPECT POWER WINDOW OPERATION for Gasoline Model: Click here for HV Model: Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Ground (P012011)
DESCRIPTION The throttle position sensor is built into the throttle body with motor assembly and detects the opening angle of the throttle valve. This sensor is a non-contact type sensor. It uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at h ...