TERMINALS OF ECU CHECK SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) (a) Disconnect the O3 sliding roof ECU (sliding roof drive gear assembly) connector. (b) Measure the resistance and voltage according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconnected.
(c) Reconnect the O3 sliding roof ECU (sliding roof drive gear assembly) connector. (d) Measure the voltage according to the value(s) in the table below.
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Fuel Injector(for Port Injection): Components
COMPONENTS ILLUSTRATION *1 FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY *2 FUEL INJECTOR ASSEMBLY *3 FUEL TUBE SUB-ASSEMBLY *4 INJECTOR VIBRATION INSULATOR *5 NO. 1 DELIVERY PIPE SPACER *6 NO. 5 ENGINE WIRE (for Bank 1) *7 NO. 5 ENGINE WIRE (for Bank 2) *8 O-RING Tightening torque for "Major areas involv ...