REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during vehicle approaching speaker controller removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
PROCEDURE 1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Click here 2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Click here 3. REMOVE VEHICLE APPROACHING SPEAKER CONTROLLER
(b) Disengage the guide. (c) Disconnect the connector to remove the vehicle approaching speaker controller. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Hybrid Control System: Check For Intermittent Problems
CHECK FOR INTERMITTENT PROBLEMS CHECK FOR INTERMITTENT PROBLEMS (a) Perform a simulation test. (1) For the simulation test, reproduce the driving conditions that were present when the problem occurred. These conditions should be based on the customer's comments and freeze frame data that is recorded ...