Components COMPONENTS ILLUSTRATION
Inspection INSPECTION PROCEDURE 1. INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY
Installation INSTALLATION PROCEDURE 1. INSTALL VEHICLE APPROACHING SPEAKER ASSEMBLY
(b) Engage the guide. (c) Install the vehicle approaching speaker assembly with the nut. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} 2. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH HINT: Use the same procedure as for the RH side. Click here 3. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH HINT: Use the same procedure as for the RH side. Click here 4. INSTALL FRONT WHEEL LH Click here Removal REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL LH Click here 2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH HINT: Use the same procedure as for the RH side. Click here 3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH HINT: Use the same procedure as for the RH side. Click here 4. REMOVE VEHICLE APPROACHING SPEAKER ASSEMBLY
(b) Disengage the guide. (c) Disconnect the connector to remove the vehicle approaching speaker assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Start Function, Gasoline Model): Open in Front Floor Electrical Key Oscillator Circuit (B27A5)
DESCRIPTION The certification ECU (smart key ECU assembly) generates a request signal and transmits the signal to the No. 1 indoor electrical key antenna assembly (front floor). For the No. 1 indoor electrical key antenna assembly (front floor) to detect when the electrical key transmitter sub-assem ...