Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

(a) for RH Side:

(1) Operate the windshield wiper motor assembly.

(2) Stop the windshield wiper motor assembly operation.

(3) Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

Standard Clearance:

Area

Measurement

A

7.5 mm (0.295 in.)

OK:

The front wiper stops at the position shown in the illustration.

*a

Alignment Mark

(b) for LH Side:

(1) Operate the windshield wiper motor assembly.

(2) Stop the windshield wiper motor assembly operation.

(3) Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

Standard Clearance:

Area

Measurement

A

7.5 mm (0.295 in.)

OK:

The front wiper stops at the position shown in the illustration.

*a

Alignment Mark

    Installation

    Removal

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Suspension Control Ecu: Installation
    INSTALLATION PROCEDURE 1. INSTALL ABSORBER CONTROL ECU (a) Install the absorber control ECU with the 2 nuts. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} NOTICE: Avoid any impact to the absorber control ECU. Do not drop the absorber control ECU. If it is dropped, replace it with a new one. (b) Connect ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0198