Toyota Avalon Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

(a) Check the operation of the door lock motor.

(1) Move the door lock to the close (lock) position.

*a

Close (Lock)

*b

Open (Unlock)

*c

Component without harness connected

(Luggage Compartment Door Lock Assembly)

(2) Apply auxiliary battery voltage to the door lock motor and check the operation of the door lock motor.

OK:

Auxiliary Battery Connection

Result

Auxiliary battery positive (+) → Terminal 1

Auxiliary battery negative (-) → Terminal 2

Luggage compartment door lock motor open (unlock) operation

If the result is not as specified, replace the luggage compartment door lock assembly.

(b) Check the operation of the luggage compartment door courtesy switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 - 3

Closed (Locked)

10 kΩ or higher

2 - 3

Open (Unlocked)

Below 1 Ω

If the result is not as specified, replace the luggage compartment door lock assembly.

    Components

    Installation

    See More:

    Toyota Avalon Service & Repair Manual > Front Power Seat Control System(for Gasoline Model With Memory): Short in Sensor with Motor Power Supply Circuit (B2658)
    DESCRIPTION This DTC is stored when a power seat motor operates (a position control sensor is being supplied with power) and the power supply voltage does not rise to the specified value. DTC No. Detection Item DTC Detection Condition Trouble Area B2658 Short in Sensor with Motor Power Supply Circui ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0142