Toyota Avalon Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR NO. 3 SPEAKER ASSEMBLY

(a) With the speaker installed, check that there is no looseness or other abnormalities.

(b) Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

(c) Measure the resistance of the speaker.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (WF2-) - 2 (WF2+)

Always

4.2 to 6.4 Ω

3 (WF1-) - 4 (WF1+)

Always

4.2 to 6.4 Ω

If the result is not as specified, replace the speaker.

*a

Component without harness connected

(Rear No. 3 Speaker Assembly)

2. INSPECT SPEAKER ASSEMBLY WITH BRACKET

(a) With the speaker installed, check that there is no looseness or other abnormalities.

(b) Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

(c) Measure the resistance of the speaker.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Always

2.8 to 3.8 Ω

If the result is not as specified, replace the speaker.

*a

Component without harness connected

(Speaker Assembly With Bracket)

    Components

    Installation

    See More:

    Toyota Avalon Service & Repair Manual > Lighting System(for Gasoline Model With Cornering Light): Freeze Frame Data
    FREEZE FRAME DATA FREEZE FRAME DATA (a) Whenever a lighting system (for Gasoline Model with Cornering Light) DTC is stored, the headlight ECU sub-assembly stores the current vehicle state as freeze frame data. CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the engine switch ...

    Toyota Avalon Owners Manual

    Toyota Avalon Service & Repair Manual

    © 2022 Copyright www.tavalon.net
    0.0162