REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during thermistor assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced
PROCEDURE 1. REMOVE FRONT BUMPER ASSEMBLY Click here 2. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH
3. REMOVE THERMISTOR ASSEMBLY
(b) Disconnect the connector to remove the thermistor assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Front Power Seat Control System(for Hv Model With Memory): Reclining Sensor Malfunction (B2651)
DESCRIPTION When the position control ECU assembly does not receive a reclining motor position sensor signal despite the seat having been moved forward or rearward by power seat motor operation, this DTC is stored. DTC No. Detection Item DTC Detection Condition Trouble Area B2651 Reclining Sensor Ma ...