Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Removal

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Audio, Visual, Telematics / Audio / Video / Stereo Component Amplifier / Removal

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during stereo component amplifier assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)

Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function When Necessary Procedures are not Performed
*: When performing learning using the Techstream. Click here
Disconnect cable from negative battery terminal	Perform steering sensor zero point calibration	Lane Departure Alert System (w/ Steering Control)
		Pre-collision System
		Intelligent Clearance Sonar System*
		Lighting System (for Gasoline Model with Cornering Light)
	Memorize steering angle neutral point	Parking Assist Monitor System
	Memorize steering angle neutral point	Panoramic View Monitor System

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here

Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)

Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function When Necessary Procedures are not Performed
*: When performing learning using the Techstream. Click here
Disconnect cable from negative auxiliary battery terminal	Perform steering sensor zero point calibration	Lane Departure Alert System (w/ Steering Control)
		Pre-collision System
		Intelligent Clearance Sonar System*
		Lighting System (for HV Model with Cornering Light)
	Memorize steering angle neutral point	Parking Assist Monitor System
	Memorize steering angle neutral point	Panoramic View Monitor System

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

Click here

2. REMOVE AUDIO AMPLIFIER COVER

(a) Remove the 3 clips and audio amplifier cover.

3. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET

(a) Disconnect each connector.

(b) Disengage the clamp.

(d) Remove the bolt.

(e) Disengage the 2 guides and remove the stereo component amplifier assembly with bracket as shown in the illustration.

	Remove in this Direction (1)
	Remove in this Direction (2)

4. REMOVE NO. 1 AMPLIFIER BRACKET

(a) Remove the 2 screws.

(b) Disengage the guide to remove the No. 1 amplifier bracket.

5. REMOVE NO. 2 AMPLIFIER BRACKET

(a) Remove the 2 screws and No. 2 amplifier bracket.

6. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY

Installation

Stereo Jack Adapter Assembly

See More:

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lighting System(for Gasoline Model): How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the lighting system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT 2. CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK HINT: In troubleshooting, confirm that the problem symptoms have been accurately identifi ...

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Removal

Installation

Stereo Jack Adapter Assembly

See More:

Toyota Avalon (XX50) 2019-2022 Owners Manual

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual